Why you need and how to make the fixture for mass production of graffiti?

Such an art as graffiti, in the last century was seen as hooliganism or protest of young people against established society laws. It was believed that the pictures printed on the walls, fences, buildings, spoil appearance of the city. Over time, the images were perceived as the expression of his thoughts. Graffiti has gained understanding in art and became part of the culture. Writers applied their images in various ways, among which also used the fixture for mass production of graffiti.
<span>

</span>

Differences in graffiti

Graffiti artists create their stories using a variety of tools. Someone make a drawing of the aerosol from the spray cans, some use airbrushes. Someone draws surreal scenes, slogans, letters of several layers. Some writers use the fixture for mass production of graffiti.
Many artists believe that the use of stencils is unacceptable and they can only be used for application-signing. As they say, how many people, so many opinions. In fact, the difference is obvious. Stencils for graffiti do not make mistakes or blunders. Also with their help, the pattern is applied quickly and easily. Attaching the workpiece to the wall, it is easy to paint over spray in a few minutes. Besides pre-made template, quality crafted, and with its help, the figure falls perfectly.
<span data-mce-mark="1">


</span>

advantages of the drawing of the image using stencil

Graphic themes using templates are applied quickly and efficiently. The fixture for mass production of graffiti is made by the writers of cardboard or other dense material. The graffiti artist is the time to think through in advance their vision of the world and Express it using the template. Small workpieces can be carried around in a suitable case to quickly use them. Stencils are made of plastic, can be used repeatedly.
<span>

</span>

where to begin?

If you want to make your device for mass production of graffiti, you will need to know that the templates can be single-layer and multi-layered. In the first case it is necessary to create the desired image and move it using the copy paper to the material for the template. It can be cardboard or thin plastic that is easy to cut. Then, using a utility knife, cut out the image, not forgetting the contours that cannot be connected.
<span>

</span>
In the second case, the only difference is that you'll need some stencils, corresponding to the number of colors used. The image layers should have their sequence. The first applied to large parts, then fine.